Overview
Ultra A3/450 (all-in-one) is a new generation of the digital revolution, creating a new digital dtf film printing process. S8 is the latest generation of powder shaker developed by Sublistar company in early 2022. The S8 series of powder shaking machines have lower energy consumption, more environmentally friendly. Power saving, Power is 2kw.
Features
A3 Plus Ultra A all-in-one DTF printer, brings your ideas into reality, because of its small footprint and complete functions, it is very suitable for home, small business, and personalized clothing customization.
- Automatic Moisturizing System
Help to maintain a certain level of humidity even when the machine is not working for a long time. Effectively relieve the drying speed of ink in the printhead and prevents clogging it.
- Temperature & Humidity Monitor
The temperature and humidity can be seen on the smart screen, and the parameters can be adjusted according to the room temperature in time to avoid a negative impact on printing due to too low or too high temperature.
- Front, Middle & Rear Heating
With three-stage heating in the front, middle and rear, the drying process can start immediately after printing. The white ink layer on top is dry to the touch and can accept a specialized powder adhesive coating.
- White Ink Filtration & Circulation System
The continuous circulation of white ink can effectively prevent precipitation and reduce the probability of clogging the print head. After effective filtration, it can effectively prolong the service life of the print head and save costs.
- Power-off Protection
It can avoid the interruption of the power supply that may burn the printheads, which helps print continuous and stable output, extend the service life of the printhead, and effectively save production costs.
- Cart Collision Avoidance System
The anti-collision function of the trolley can effectively protect the print heads, greatly delay the damage of the print heads, and prolong the use time of the print heads.
- Integrated TPU Powder Drying & Curing System
After the DTF printer is printing your design, the integrated automatic TPU adhesive powder shake will shake the powder evenly, and then directly melt the required amount of adhesive material to the printing image, saving time, energy and cost.
INCLUDED WITH YOUR PURCHASE:
- Direct to Film Printer & Shaker (A3/450 ULTRA)
- One roll DTF film
- 1 Power Cord/ USB interface data cable
- Lifetime Technical Support
- Limited 2-year warranty for machine
BONUS: Online Video Tutorials
BONUS: ICC Profile for SUBLISTAR DTF Inks ONLY
NOTE: Option to choose an easy RIP software (MainTop/ PhotoPrint/ CADLink)
* PhotoPrint/ MainTop RIP software is free included. Extra payment required if select CADLink RIP software when purchasing.
Machine Parameter
| Sublistar DTF PET Film Inkjet Printer | |
| Brand | Sublistar |
| Model Type | DTF-A3 Ultra I (all-in-one) |
| Print Head | I3200-A1 / XP600 |
| Print Resolution | 2400DPI |
| Ink Type | Pigment ink (C M Y BK+W) |
| Max Print Size | 300MM |
| Feeding size | 300MM |
| Software | Maintop RIP/PhotoPrint RIP/CADlink RIP |
| Operation Enviroment | Temperature 24°C~26°C, Humidity 50%~75% |
| Power | 110V/220V |
| Machine Size | 1900*1075*695mm(L*W*H) |
| Packing | (Packing Size): 1990*1150*860mm(L*W*H) |
| Weight | (Net Weight): 200KG； (Gross Weight): 280KG |
| Applicable Substrate | Cotton, nylon, polyester, 50/50 blends, Spendex, Chemical fiber, Leather, PVC & EVA, Etc. |
Latest Epson I1600-A1 Print Head
Ultra A (all-in-one) DTF Printer using Epson’s latest I1600 print heads. Epson’s unique Variable Sized Droplet Technology
(VSDT) delivers smooth gradation by freely control
to eject the droplet volume.
Ink ejection of up to 4 colours realize with high resolution
(600 dpi/colour) meeting various customer needs, high durability, prolonging the life of the printer.
| Model | I 1600-A1 |
| Ink Types | Water based ink |
| Size(width x depth x height)(mm) | 69.1×59.4×35.6 |
| Weight(g) | 80 |
| Nozzle Numbers | 1600 |
| Nozzle pitch/nozzle row | 1/300 inch |
| Nozzle Row | 4 rows |
| Max color/head | 4colors |
| Nozzle Resolution | 300npi/1row 600npi/2row |
| Max. number of colour inks | 4 colours |
| Effective Printing Width(mm) | 33.8 mm (1.33 inches) |
| Jet Freqency(kHz) | 43.2(single dot), 21.6(multi dot) |
| Ink Drops(pl) | 3.8, 6, 12 |
| Ink Viscosity(mPa.s) | 3~4 |
Limited Warranty:
Sublistar provides a 24-month warranty for printing machines including DTF, UV, DTG, Sublimation, Heat Press Machine and the components except consumables such as powder, ink, etc. Our technicians can be issued a replacement on some parts that will be covered in the limited warranty. Technicians can assist by chat or video chat to help replace a part and troubleshoot during this time. Once the limited warranty ends, the customers are responsible for any parts costs and troubleshooting. Customers may self-install parts or use their technicians, but Sublistar is not responsible for damages caused during self-repair.
Section 2 - What is covered
Sublistar company provides 3-6 months free warranty service for the print head for the following series of machines.
During this period, technicians will assist in replacing print head parts and troubleshooting through chat or video chat.
If the problems cannot be resolved, a new print head will be replaced for free. Once the limited warranty ends, the customer will be responsible for any parts costs and troubleshooting. Customers can install parts themselves or use their technicians, but Sublistar is not responsible for damage caused during the self-repair process.
- DTF-600 Series Star IV DTF Printer & Shaker
- DTF-1200 Series Star IV DTF Printer & Shaker
- DTF-600 Series Star III DTF Printer & Shaker
- DTF-1200 Series Star III DTF Printer & Shaker
- DTF-600 Series Eco Star III DTF Printer & Shaker
- DTF-600 Series Ultra II DTF Printer & Shaker
Section 3 - What is not covered
- The consumables such as powder, ink, paper, film etc. are not covered by warranty.
- The print heads of the following series are not covered by warranty:
- DTF-A3+Star IV DTF Printer & Shaker
- DTF-A3+Ultra A All-in-one DTF Printing Machine
- UV Star IV Series Machine
- UV Star III Series Machine
- DTG DTX Series Machine
- Sublimation SUB Series Machine
Please note that:
- If you have any questions after the receipt of our Sublistar products, please feel free to contact us via any online means and we would be delighted to offer you kind service within the warranty period.
- The equipments that are covered by warranty can be repaired or replaced within the warranty period if they are not artificially damaged.
- If you find the equipment problems and handle them by yourself after the receipt of our products or require for any repair or replacement after the warranty period, Sublistar would not bear any responsibilities.
For questions or any concerns about the policy, please contact us at support@subli-star.com.
Dear International Customers,
Our orders are shipped directly from our factory in China. Shipping to most countries worldwide, we work with a dedicated shipping team to provide you with discounted shipping rates.
Please select the most suitable shipping mode according to your requirements:
- Expedited Shipping Options:
International Express Delivery (Such as DHL/TNT/FedEx/UPS/EMS): Fast & Convenient, suitable for goods with small volume and light weight like components or samples.
Shipping Time: On average, 7-10 working days to most countries.
Air Transportation Fast & Convenient. For expedited shipments of goods, including oversized items. The freight forwarder transports the goods from original place to destination airport, and the customers need to handle customs clearance and pick up the goods by themself.
Shipping Time: On average, 10-20 working days to most countries.
- Economy Shipping Options:
Sea Transportation
Cost-effective, suitable for shipment of large amounts of goods. It is the shipping method most customers choose.
The freight forwarder transports the goods from the original place to the destination seaport, and the customer needs to handle customs clearance and pick up the goods by himself.
Shipping Time: On average, 20-40 working days to most countries.
- Sea Transportation Door to Door
Safe & Convenient & Flexible & One-stop Service, suitable for customers who may not be familiar with the shipping procedure and want to save trouble.
The freight forwarder transports the goods directly from the original place to the destination and handles customs clearance and delivery.
Shipping Time: On average, 20-40 working days to most countries.
Please note that:
1.Shipping time is in addition to any processing or production time. Due to high demand for machines and equipment, some equipment requires a lead time for production.
2.Business days are M-F and start counting from the date that the carrier receives the parcel, we hand off most parcels to the carrier on the same day.
For questions or any concerns about the policy, please contact us at support@subli-star.com