Cold-Peel/ Hot-peel DTF Transfer Film(30CM/60CM), Single-sided Matte Glossy DTF Film Roll

$436.00 $284.12 SAVE 35%
SKU: CP60FM
Availability : In Stock Pre order Out of stock

Technical Highlights

  • 1 Case contains 1 roll/2 rolls
  • Size: 30cm/60cm
  • Thickness: 90μ
  • Core: 3inch
  • The surface is smooth and clean
  • MOQ: 30cm*100m 2 rolls start; 60cm*100m 1 roll start.

Top Features:

  • Smooth printing and no jamming
  • Moisture-proof, single-sided matte finish coating
  • Releases cleanly and can be easily cold-teared
  • Strong stretch resilience and no deformation
  • Soft hand feeling

Type: Cold-Peel

Cold-Peel
Hot-Peel

Size: 60cm*100m

60cm*100m
30cm*100m
Overview

Cold-peel DTF film VS Hot-peel DTF Film

DTF film is one of the most important consumables in Direct to Film printing process, T-shirt printing cannot be done without transferring the print patterns onto the clothes, (so the DTF Film is called DTF Transfer Film as well), Hot Peel Film and Cold Peel Film are 2 types of DTF Film used for the transferring.

The key differences between Hot Peel Film and Cold Peel Film are: Hot Peel Film is more efficient, for large patterns with lower press temperature (140℃-150℃) while Cold Peel Film can be applied to more types of fabrics with longer-term water washing fastness at lower cost.

Cold-peel DTF Film---The main component of cold-peel DTF film is silicon. Silicone is easier to melt and apply to the film than hot-peel DTF film. This is why the cold-peel DTF film is more stable than the hot-peel DTF film on the market.

Hot-peel DTF film---To achieve a quick tear, the main component of the release layer is wax, which is relatively unstable and does not melt and apply easily.

The pressing temperature of cold peel DTF film is longer than that of hot peel film, usually 150-170℃ for 10-20 seconds, after pressing, it takes about 30 seconds cooling time before tearing off. The adhesive layer of the cold peel film adopts oil-based back coating method and has good washing fastness.

Specification

  Size 30cm/ 60cm*100m
  Thickness 90μ
  Peel Cold peel/ Hot peel optional
  Temperature 165℃
  Press time 15s
  Ink load Maximum 400%
  Application T-shirts, bags, shoes, socks, leather and more

Features

  • Vivid Color and Durable: DTF transfer film has a high color yield, and the high transfer rate accomplishes vivid, clear colors. Washable, soft to the touch and durable.
  • Three coating layers: Single-sided matte glossy DTF film, 3 layers coating process for better ink absorption for fuller prints, allowing for brilliant color-rich transfers. 
  • Easy to peel off: The film surface is dry and can be easily cold-peeled.
  • Works with Most Fabrics: Works with all material fabrics: including cotton, jeans, leather, blends, spandex, nylon, canvas, polyester, etc.
  • Good elasticity: The pattern after being heat transferred has a texture like PU glue, strong elasticity and no deformation when stretched, and the hand feels softer than screen printing.

Warranty

Section 1 - Limited Warranty:

Sublistar provides a 24-month warranty for printing machines including DTF, UV, DTG, Sublimation, Heat Press Machine and the components except consumables such as powder, ink, etc. Our technicians can be issued a replacement on some parts that will be covered in the limited warranty. Technicians can assist by chat or video chat to help replace a part and troubleshoot during this time. Once the limited warranty ends, the customers are responsible for any parts costs and troubleshooting. Customers may self-install parts or use their technicians, but Sublistar is not responsible for damages caused during self-repair.


Section 2 - What is covered


1. DTF Series Printers:

Warranty Period: 24 months from the date of purchase.
Covered Components: Mainboard, Headboard, and Powerboard.

2. Shaker:

Warranty Period: 24 months from the date of purchase.
Covered Components: Main Control Board, SCR Board, PLC Color Screen.

3. Printer Printheads (used with Sublistar Ink):

Warranty Period: 3-6 months,depending on the specific product.

Warranty Terms and Conditions:

  • Warranty Coverage: Warranty applies to defects caused by non-human factors during normal use.
  • Warranty Service: Return the product for inspection. If eligible, a new replacement will be sent.
  • Return and Replacement: Customer is responsible for return shipping. New product will be shipped upon verification.
  • Exclusions: Warranty does not cover improper handling, unauthorized modifications, accidents, or force majeure.
  • Warranty Void: Warranty expires, tampered product, or damage due to misuse voids warranty.

For more details, refer to the complete terms and conditions provided with the product.Sublistar company provides free warranty service for the print head for the following series of machines.

  • DTF-600 Series Star IV DTF Printer & Shaker
  • DTF-1200 Series Star IV DTF Printer & Shaker
  • DTF-600 Series Ultra DTF Printer & Shaker
  • 24" Mini-600 Ultra DTF Printer & S9 Shaker
  • Ultra A3/450 DTF Printer & Shaker


Section 3 - What is not covered

The consumables such as powder, ink, paper, film etc. are not covered by warranty.

Please note that:

  1. If you have any questions after the receipt of our Sublistar products, please feel free to contact us via any online means and we would be delighted to offer you kind service within the warranty period.
  2. The equipments that are covered by warranty can be repaired or replaced within the warranty period if they are not artificially damaged.
  3. If you find the equipment problems and handle them by yourself after the receipt of our products or require for any repair or replacement after the warranty period, Sublistar would not bear any responsibilities.

For questions or any concerns about the policy, please contact us at support@subli-star.com.

Shipping

Dear Customers
Our orders are shipped directly from our factory in China. Shipping to most countries worldwide, we work with a dedicated shipping team to provide you FREE SHIPPING.

Shipping Methods:

1. Air Express Delivery (DHL/TNT/FedEx/UPS/EMS) for small volume and light weight items like Ink, Film, Powder & Print-head
Shipping Time: 7-10 Business days to most countriesOn average.
2. Sea Transportation Door to Door for larger amounts of goods like Printers, Shakers, Sublimation Printer, Heat Press
Shipping Time: 20-40 Business days to most countriesOn average.

Tax:

Import tax and VAT are not included in the price.We will prepare the documents to assist on the custom clearance. More questions, please contact us.

Important Notes:

1. Shipping time is separate from processing or production time. Some equipment may have a lead time for production due to high demand.
2. If you purchase ink, powder and other consumables together with the machine, the machine will be transported separately from the liquid and powder according to the transportation policy, so the delivery time is not exactly the same.
3. Business days are Monday-Friday, starting from when the carrier receives the parcel. For questions or any concerns about the policy, please contact us at support@subli-star.com

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)