TPU DTF Powder Hot Melt Adhesive for DTF Printers
TPU DTF powders are specially designed for use with DTF printing. The powder comes in 1 kg, 5 kg, 20 kg, and 25 kg. Packaging is divided into bags and barrels.
TPU hot melt powder, also known as polyurethane hot melt powder, often comes in black or white. It can withstand high temperatures and wash well. often employed in the hot stamping, swimwear printing, and other industries.
Our DTF powders are slow-drying and easy to cold-tear. This revolutionary technology will help you get excellent transfer printing results.
Notes For DTF Hot Melt Powder
Testing Condition:
Transfer Temperature: 130-160℃
Transfer Time: 8-15 seconds
About Storage:
In order to protect unused dtf powder, it is recommended to store it in its original packaging, at 68°F–82°F (20°C–28°C) and 40–60% RH.
About Printing:
DTF powders are specially designed to use with DTF printing process. Working with DTF film and DTF ink to get excellent transfer printing results.
Why Sublistar Hot Melt Powder?
- DTF powder is specially used for DTF printing. Our powder has excellent adhesion, and excellent washability, and can accurately adhere to ink rather than film.
- This powder can be cured at 150C or 300F and pressed for 10-20 seconds. Press the completed transfer again for 10 seconds, and put a piece of parchment paper on it to get a better feel.
- This powder can be cured in an oven using a hot air gun or under a hot press.
-
The process to using the powder:
1. Place the transfer paper on a hot-pressed pillow or hot-pressed foam.
2. Lower the top heating plate until it is about 1 cm away from the transfer.
3. Solidify the powder at 160C for about 2 minutes or until melted. At first, it will become sparkling. Then it will melt and form a flat surface.
 |
Soft DTF Powder Particle size 80-170um , easy to melt, soft and smooth after transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts |
| Rough DTF Powder Particle size 120-250um，easy to melt，after transfer, the hand feel is obvious. It is suitable for rough fabrics, such as denim, non-woven fabrics, and linen |
|
 |
Anti-stretch DTF Powder This powder is very fine, easy to melt, the transfer finished product is stretch-resistant, suitable for stretch fabrics |
| Anti-sublimation DTF powder Using to block clothing colors or patterns that may be visible through transfer. easy to melt, Suitable for dark fabrics |
|
 |
Breathable DTF powder Breathable DTF powder provides a more breathable print with a smooth feel and softness |
Classifications Of Sublistar TPU DTF Hot Melt Powder
Classifications | Features |
|---|---|
| Soft DTF Powder | Particle size 80-170um, easy to melt, soft and smooth after the transfer, suitable for smooth and flat fabrics, such as T-shirts, sweaters, sweaters, polo shirts |
| Rough DTF Powder | Particle size: 120–250, easy to melt. After transferring, the hand feel is obvious. It is suitable for rough fabrics, such as denim, non-woven fabrics, and linen. |
| Anti-stretch DTF Powder | This powder is very fine and easy to melt, the transfer finished product is stretch-resistant and suitable for stretch fabric |
| Anti-sublimation DTF powder | It is used to block clothing colors or patterns that may be visible through transfer. And it is easy to melt, making it suitable for dark fabrics. |
| Hot Peel DTF powder | Using hot tearing DTF powder, even with ordinary DTF film can also achieve instant tearing without waiting. |
Why TPU DTF Hot Melt Adhesive Powder?
| TPU HOT MELT ADHESIVE POWDER （UPGRADED） | PES HOT MELT ADHESIVE POWDER (REGULAR) |
| Features | 1) Excellent washing resistance and elasticity 2) Excellent dry cleaning resistance 3) Excellent bonding strength and fabric lamination 4) Excellent endurance; no pollution. 5) Soft feeling 6) Mixed with water-based glue or dusting printing processes |
| Applications | 1) Heat transfer printing, DTF, hot stamping, flocking ink, printing ink 2) Woven and non-woven interlining, shoe lining, shoulder lining, and cap lining. 3) Lamination. 4) Other industries. |
| Material | Thermoplastic polyurethane |
| Melting Point(°C) | 105-115°C |
| Hot Pressing Temperature(°C) | 110-130°C |
| Density | 1.21+0.02g/cm3 |
| Washing Resistant Time | 60°C/72h |
| Thickness | 0-80, 80-200 um |
Limited Warranty:
Sublistar provides a 24-month warranty for printing machines including DTF, UV, DTG, Sublimation, Heat Press Machine and the components except consumables such as powder, ink, etc. Our technicians can be issued a replacement on some parts that will be covered in the limited warranty. Technicians can assist by chat or video chat to help replace a part and troubleshoot during this time. Once the limited warranty ends, the customers are responsible for any parts costs and troubleshooting. Customers may self-install parts or use their technicians, but Sublistar is not responsible for damages caused during self-repair.
Section 2 - What is covered
Sublistar company provides 3-6 months free warranty service for the print head for the following series of machines.
During this period, technicians will assist in replacing print head parts and troubleshooting through chat or video chat.
If the problems cannot be resolved, a new print head will be replaced for free. Once the limited warranty ends, the customer will be responsible for any parts costs and troubleshooting. Customers can install parts themselves or use their technicians, but Sublistar is not responsible for damage caused during the self-repair process.
- DTF-600 Series Star IV DTF Printer & Shaker
- DTF-1200 Series Star IV DTF Printer & Shaker
- DTF-600 Series Star III DTF Printer & Shaker
- DTF-1200 Series Star III DTF Printer & Shaker
- DTF-600 Series Eco Star III DTF Printer & Shaker
- DTF-600 Series Ultra II DTF Printer & Shaker
Section 3 - What is not covered
- The consumables such as powder, ink, paper, film etc. are not covered by warranty.
- The print heads of the following series are not covered by warranty:
- DTF-A3+Star IV DTF Printer & Shaker
- DTF-A3+Ultra A All-in-one DTF Printing Machine
- UV Star IV Series Machine
- UV Star III Series Machine
- DTG DTX Series Machine
- Sublimation SUB Series Machine
Please note that:
- If you have any questions after the receipt of our Sublistar products, please feel free to contact us via any online means and we would be delighted to offer you kind service within the warranty period.
- The equipments that are covered by warranty can be repaired or replaced within the warranty period if they are not artificially damaged.
- If you find the equipment problems and handle them by yourself after the receipt of our products or require for any repair or replacement after the warranty period, Sublistar would not bear any responsibilities.
For questions or any concerns about the policy, please contact us at support@subli-star.com.
Dear International Customers,
Our orders are shipped directly from our factory in China. Shipping to most countries worldwide, we work with a dedicated shipping team to provide you with discounted shipping rates.
Please select the most suitable shipping mode according to your requirements:
- Expedited Shipping Options:
International Express Delivery (Such as DHL/TNT/FedEx/UPS/EMS): Fast & Convenient, suitable for goods with small volume and light weight like components or samples.
Shipping Time: On average, 7-10 working days to most countries.
Air Transportation Fast & Convenient. For expedited shipments of goods, including oversized items. The freight forwarder transports the goods from original place to destination airport, and the customers need to handle customs clearance and pick up the goods by themself.
Shipping Time: On average, 10-20 working days to most countries.
- Economy Shipping Options:
Sea Transportation
Cost-effective, suitable for shipment of large amounts of goods. It is the shipping method most customers choose.
The freight forwarder transports the goods from the original place to the destination seaport, and the customer needs to handle customs clearance and pick up the goods by himself.
Shipping Time: On average, 20-40 working days to most countries.
- Sea Transportation Door to Door
Safe & Convenient & Flexible & One-stop Service, suitable for customers who may not be familiar with the shipping procedure and want to save trouble.
The freight forwarder transports the goods directly from the original place to the destination and handles customs clearance and delivery.
Shipping Time: On average, 20-40 working days to most countries.
Please note that:
1.Shipping time is in addition to any processing or production time. Due to high demand for machines and equipment, some equipment requires a lead time for production.
2.Business days are M-F and start counting from the date that the carrier receives the parcel, we hand off most parcels to the carrier on the same day.
For questions or any concerns about the policy, please contact us at support@subli-star.com